How To Get Oil Stains Out Of Timberland Boots

Knowing how to get oil stains out of Timberland boots is going to help you give them a new leash of life.

It will also help prolong their lifespan. After all, they do not come cheap!

Why are timbs so expensive? This question is very popular on the web. In this case, “Timbs” means Timberlands.

The secret is in the quality of these boots. They are considered a kind of high-end construction and work boots. And alas! That is why you must learn how to take good care of them so that you can keep them in superb condition all the time.

So do you want to know how to get oil stains out of timberland boots? This should be easy. You just need a few items to do the job, as we will show you here.

Method 1: Using Powder

The most important thing to do is to remove the grease stains as soon as possible. Considering that grease is not soluble in water, when the boots get it, it can be a hard nut to crack if left to stay on the shoes for too long. When you get rid of the grease fast enough, the stain will go away completely.

But first, you have to gather the things that you will need.

What you will need

From the small list of things that you will need, you can tell that this is not a complicated process at all. It is quite simple.

Now, here is the step-by-step process for lifting the stain out of your leather shoes.

Step 1: Soak Up Excess Grease with Paper Towel

If the stain is fresh, you can use a paper towel to lift as much of the grease as you can. The paper towel soaks what it can.

The secret is to keep pressing the paper towel into the stain until such a time, as you will notice that there is nothing to soak up. Use a fresh towel until most of the stain is gone.

If the stain is a couple of days old and seems sunk into the leather, you can skip this step. You can proceed to the next step. Generally, fresh stains are easier to remove than old ones, so dab it out as soon as it happens.

Step 2: Using Cornstarch/Talcum Powder

If the boots come in a brighter color, most of them do, you should be able to see the stain very well. If they are darker, you should just note where the stain is located.

Apply your talcum powder or cornstarch on the area. If you have baby powder, it is alright, use it because it works just as well.

The powder will soak up all of the oil from the leather. However, this is a slow process and therefore you have to leave the shoes overnight. If there are many oil spots on the shoes, sprinkle the powder generously so that it can suck out all the oil.

If you start cleaning your shoes in the morning, you do not have to wait for them to stay overnight to dry. Just let them stay for about 8 hours and then remove the powder.

Step 3: Clean Out the Powder

The following morning, brush the powder away with the old toothbrush. You can also use another soft-bristled brush if you have one.

You may also use a piece of cloth. Check to see whether the stain is gone completely. If it is, you are done. Just brush the leather grains and fibers back into place.

If there are still signs of the stain, it means it is not completely gone. Therefore, you can just repeat the entire process, even a third time if need be. Large, old oil stains on leather can be that stubborn to clean away.

Method 2: Using Timberland cleaning Kit

If you are a Timberland diehard, you can invest in a cleaning kit. You can order it online and always use it to keep your shoes in superb condition.

The kit contains a brush, dirt remover, a manual for the user, a balm-proofer and an eraser. Therefore, even if it is your first time to clean these shoes, the user manual will guide you amply.

Step 1: Clean the superficial dirt first

This should always be your first step when cleaning footwear. If there is mud, cement or any other kind of stuck dirt, clean it out first. This will also make it easy for you to identify the oil stain.

Step 2: Use the eraser

If there are spots on the boots, use an eraser to remove them. Just rub gently but firmly in a circular motion at the spots until they are gone.

Step 3: Using cornstarch on oil stain

The eraser will not remove oil stains. Therefore, fluff the area around and on the oil stain with the brush in the kit. You can apply a generous coating of cornstarch on the oily area and let it sit for several hours or overnight to soak up the stain.

Lastly, clean out the powder and check whether the entire oil stain is gone. If it has gone, you have succeeded. If it has not, you can repeat the process, at least cornstarch part.

Conclusion

Once you know how to get oil stains out of Timberland boots, you can always give then a fresher spanking new look.

But do not let the stain stay on the leather too long because it will be more stubborn to remove. If possible, remove as soon as it happens.